Upgraded to SuSE Linux 10

Posted on November 21, 2005 by kowal — 10 Komentar

ok.. setelah berkutat dengan suse 10 selama 2 mingguan ini. akhirnya dgn bangga gw bisa bilang: All running at 100%. 😀
Internet: Online
3D: On 😀

aniwey here’s the review. menurut gw dibanding dgn suse 9.3 suse 10 ini lebih cepet n lebih responsif. memang pada boot pertama agak lama, tapi boot2 selanjutnya ngacir bo’.

pada awalnya gw sempat mengalami 2 masalah:

1. gw online melalui phone zte wp920BD yg chip modemnya qualcomm. di yast terdeteksi sebagai /dev/ttyACM0 dan output lsusb menghasilkan:

Bus 002 Device 005: ID 05c6:3100 Qualcomm, Inc. CDMA Wireless Modem/Phone

yang menandakan modem terdeteksi dengan baik.
masalahnya tidak ada file ttyACM0 di direktori /dev/ (what the f@ck). so gag bisa internetan deh.

2. VGA gw pake Radeon 9550, dan 3D-nya tidak berfungsi. gw dah download drivernya dari http://www.ati.com –> Drivers & Software –> Linux dan ngikutin cara2 di ati-installer-HOWTO.html yg gw dapet dari ftp-nya suse. no luck, gw malah gag bisa masuk ke kdm. blank screen.

solusi
1. edit file /etc/init.d/boot.local
tambahkan command berikut:
mknod /dev/ttyACM0 c 166 0
modprobe cdc-acm
contoh boot.local gw:

#! /bin/sh
#
# Copyright (c) 2002 SuSE Linux AG Nuernberg, Germany. All rights reserved.
#
# Author: Werner Fink , 1996
# Burchard Steinbild, 1996
#
# /etc/init.d/boot.local
#
# script with local commands to be executed from init on system startup
#
# Here you should add things, that should happen directly after booting
# before we’re going to the first run level.
#

mknod /dev/ttyACM0 c 166 0
modprobe cdc-acm

command tsb akan meng-create file /dev/ttyACM0 dan meload module cdc-acm pada setiap boot. knapa pada setiap boot? karena file /dev/ttyACM0 terhapus secara otomatis setiap kali system dimatikan. mungkin bug pada suse.

2. hanya untuk vga ATI, yg nvidia gw gag tau ya.. gag punya :p
download drivernya dari http://www.ati.com –> Drivers & Software –> Linux
ati-driver-installer-8.18.8-i386.run
lalu coba ikuti langkah2 yg ada pada ati-installer-HOWTO.html. kalo berhasil, you’re in luck. kalo gagal, maka ikutin langkah2 gw.

sebagai user jalankan command berikut di direktori yg ada driver ati yg situ download itu.

$./ati-driver-installer-8.18.8-i386.run –extract fglrx
$su

#mkdir /usr/share/doc/packages/fglrx/
#cp -v ./fglrx/packages/SuSE/* /usr/share/doc/packages/fglrx/
#./ati-driver-installer-8.18.8-i386.run

pilih yg automatic aja. setelah intalasi jgn menjalankan command fglrxconfig. tapi jalankan command:

#sax2 -r -m 0=fglrx -b /usr/share/doc/packages/fglrx/sax2-profile

restart. harusnya sekarang 3D udah aktif di suse 10 lo. bisa dicek dgn command fglrxinfo

$fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9550 Generic
OpenGL version string: 1.3.5395 (X4.3.0-8.18.8)

kalo outpotnya bukan mesa bearti sukses.

kalau lo termasuk diantara orang2 yg tidak beruntung :p n malah gag bisa masuk ke x (kdm, gdm) . hapus semua modelines yg ada di section Modes dari xorg.conf anda (backup dulu ya!). itu biang kerok yg ngebikin blank screen. (2 hari ngutak-atik xorg.conf, ternyata biang keroknya itu)

berikut contoh xorg.conf gw, perhatikan Section “Modes” nya yg tanpa modeline

# /…/
# SaX generated X11 config file
# Created on: 2005-11-02T12:51:48+0700.
#
# Version: 7.1
# Contact: Marcus Schaefer , 2002
#
# Automatically generated by [ISaX] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section “Files”
FontPath “/usr/X11R6/lib/X11/fonts/misc:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/local”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/Type1″
FontPath “/usr/X11R6/lib/X11/fonts/URW”
FontPath “/usr/X11R6/lib/X11/fonts/Speedo”
FontPath “/usr/X11R6/lib/X11/fonts/PEX”
FontPath “/usr/X11R6/lib/X11/fonts/cyrillic”
FontPath “/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/latin2/Type1″
FontPath “/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/baekmuk:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/japanese:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/kwintv”
FontPath “/usr/X11R6/lib/X11/fonts/truetype”
FontPath “/usr/X11R6/lib/X11/fonts/uni:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/CID”
FontPath “/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/hellas/Type1″
FontPath “/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/xtest”
FontPath “/opt/kde3/share/fonts”
InputDevices “/dev/ttyS0″
InputDevices “/dev/ttyS1″
InputDevices “/dev/ttyS2″
InputDevices “/dev/ttyS3″
InputDevices “/dev/ttyS4″
InputDevices “/dev/ttyS5″
InputDevices “/dev/ttyS6″
InputDevices “/dev/ttyS7″
InputDevices “/dev/ttyS8″
InputDevices “/dev/psaux”
InputDevices “/dev/logibm”
InputDevices “/dev/sunmouse”
InputDevices “/dev/atibm”
InputDevices “/dev/amigamouse”
InputDevices “/dev/atarimouse”
InputDevices “/dev/inportbm”
InputDevices “/dev/gpmdata”
InputDevices “/dev/mouse”
InputDevices “/dev/usbmouse”
InputDevices “/dev/adbmouse”
InputDevices “/dev/input/mice”
InputDevices “/dev/input/event0″
InputDevices “/dev/pointer0″
InputDevices “/dev/pointer1″
InputDevices “/dev/pointer2″
InputDevices “/dev/pointer3″
EndSection

Section “ServerFlags”
Option “AllowMouseOpenFail”
EndSection

Section “Module”
Load “dbe”
Load “type1″
Load “freetype”
Load “extmod”
Load “glx”
Load “v4l”
Load “dri”
EndSection

Section “InputDevice”
Driver “kbd”
Identifier “Keyboard[0]”
Option “Protocol” “Standard”
Option “XkbLayout” “us”
Option “XkbModel” “pc104″
Option “XkbRules” “xfree86″
EndSection

Section “InputDevice”
Driver “mouse”
Identifier “Mouse[1]”
Option “Buttons” “5″
Option “Device” “/dev/input/mice”
Option “Name” “ImPS/2 Logitech Wheel Mouse”
Option “Protocol” “explorerps/2″
Option “Vendor” “Sysp”
Option “ZAxisMapping” “4 5″
EndSection

Section “Monitor”
Option “CalcAlgorithm” “XServerPool”
DisplaySize 360 270
HorizSync 30-96
Identifier “Monitor[0]”
ModelName “M991″
Option “DPMS”
VendorName “DELL”
VertRefresh 50-160
UseModes “Modes[0]”
EndSection

Section “Modes”
Identifier “Modes[0]”
EndSection

Section “Screen”
DefaultDepth 24
SubSection “Display”
Depth 15
Modes “1280×1024″ “1280×960″ “1280×800″ “1152×864″ “1280×768″ “1024×768″ “800×600″ “768×576″ “640×480″
EndSubSection
SubSection “Display”
Depth 16
Modes “1280×1024″ “1280×960″ “1280×800″ “1152×864″ “1280×768″ “1024×768″ “800×600″ “768×576″ “640×480″
EndSubSection
SubSection “Display”
Depth 24
Modes “1280×1024″ “1280×960″ “1280×800″ “1152×864″ “1280×768″ “1024×768″ “800×600″ “768×576″ “640×480″
EndSubSection
SubSection “Display”
Depth 32
Modes “1280×1024″ “1280×960″ “1280×800″ “1152×864″ “1280×768″ “1024×768″ “800×600″ “768×576″ “640×480″
EndSubSection
SubSection “Display”
Depth 8
Modes “1280×1024″ “1280×960″ “1280×800″ “1152×864″ “1280×768″ “1024×768″ “800×600″ “768×576″ “640×480″
EndSubSection
Device “Device[0]”
Identifier “Screen[0]”
Monitor “Monitor[0]”
EndSection

Section “Device”
BoardName “RV350 AS”
BusID “2:0:0″
Driver “fglrx”
Identifier “Device[0]”
Option “FSAADisableGamma” “no”
Option “TVHPosAdj” “0″
Option “Stereo” “off”
Option “FSAAMSPosX3″ “0.000000″
Option “CenterMode” “off”
Option “FSAAMSPosY0″ “0.000000″
Option “ScreenOverlap” “0″
Option “mtrr” “off”
Option “FSAAMSPosX4″ “0.000000″
Option “FSAAMSPosY1″ “0.000000″
Option “IgnoreEDID” “off”
Option “ForceGenericCPU” “no”
Option “NoTV” “yes”
Option “FSAAScale” “1″
Option “FSAAMSPosX5″ “0.000000″
Option “FSAAMSPosY2″ “0.000000″
Option “FSAAMSPosY3″ “0.000000″
Option “GammaCorrectionI” “0×00000000″
Option “no_accel” “no”
Option “FSAAMSPosY4″ “0.000000″
Option “FSAACustomizeMSPos” “no”
Option “UseFastTLS” “0″
Option “FSAAMSPosY5″ “0.000000″
Option “TVVSizeAdj” “0″
Option “BlockSignalsOnLock” “on”
Option “FSAAEnable” “no”
Option “GammaCorrectionII” “0×00000000″
Option “TVHSizeAdj” “0″
Option “VideoOverlay” “on”
Option “TVVPosAdj” “0″
Option “no_dri” “no”
Option “TVColorAdj” “0″
Option “StereoSyncEnable” “1″
Option “UseInternalAGPGART” “no”
Option “FSAAMSPosX0″ “0.000000″
Option “TVHStartAdj” “0″
Option “PseudoColorVisuals” “off”
Option “Capabilities” “0×00000000″
Option “FSAAMSPosX1″ “0.000000″
Option “TVStandard” “PAL-D”
Option “FSAAMSPosX2″ “0.000000″
Option “OpenGLOverlay” “off”
VendorName “ATI”
EndSection

Section “ServerLayout”
Identifier “Layout[all]”
InputDevice “Keyboard[0]” “CoreKeyboard”
InputDevice “Mouse[1]” “CorePointer”
Option “Clone” “off”
Option “Xinerama” “off”
Screen “Screen[0]”
EndSection

Section “DRI”
Group “video”
Mode 0660
EndSection

Section “Extensions”
EndSection